Following the unexpected success of the X-T1 back in 2014, Fujifilm made the strategic decision to release a smaller, stripped-down version of the flagship camera that was dubbed the X-T10. The decision must have borne fruit because Fujifilm has adopted the very same strategy with the X-T1’s successor, the X-T2, and the X-T20, the latter of which was officially announced a few days ago.Since the X-T20 targets mid-range users, it also comes with a dedicated Auto switch if you want to hand over full control to the camera and a built-in pop up flash.As with the X-Pro2, a full ⅔ of the frame in either a 7 × 7 or 13 × 13 grid is now covered by fast phase detect autofocus points. I guess we’ll need to wait for X-Trans IV to see the whole sensor covered in phase detection.If you’re just getting into the Fuji ecosystem, and you have the means, this is the camera I would recommend you buy. The only other consideration might be the new X-T20, especially, but not exclusively, for novices. It matches the X-Pro2 and X-T2 in many ways. For the seasoned photographer who doesn’t want to worry about the elements and needs an interchangeable body, this is the one camera to rule them all.Open in app Become a memberSign inShooting with the Fuji XT-2Mike CalcagnoFollowMay 13, 2017 · 21 min readNote: Much of this content was published originally in May 2017 as part of a multi-part series of “usage notes” that described my camera setup and preferences. I’ve distilled those notes into this single article.
Device info: Manufacturer: FUJIFILM. Model: X-T2. Camera summary: Manufacturer: FUJIFILM. Model: X-T2. Version: 1.10. Serial Number: nnnnnnnnnnnnnnnnnnnBnnnnnnnnnn .
The Fuji XT-2 is online now at multiple retailers. At B&H it’s listed for USD$1599, body only. The release is suggested around September 8. There is also a vertical battery grip that takes 2 batteries, bringing the total up to three – a welcome for those of us that shoot all day and don’t want to swap out batteries all the time.Drive Dial: While functionally identical to the Metering Dial, the Drive Dial is more accessible because of where it is positioned, except for when it is set to “Panorama,” which likely won’t be often, if ever. I didn't technically buy two Fuji X-T3s. Instead, early last year I bought an Fuji X-T2 as a walk around camera just to Simply put, I can create more assets for a client in a shorter amount of time with less weight for less costs. I actually did buy two XT3s to go with an XT2. I just love how Fuji makes a.. Bigger sensor. 24.3mp I’ve never been the megapixel guy. But I’ve always said 24mp was my sweet spot. I crop to 16:9 and 1:1 often enough that having the extra pixels is helpful.
The grip also provides one additional function button which mimics the setting of Function Button 1, the button on the body between the Exposure Compensation and Shutter Speed Dials. This is unfortunate as that button is so inaccessible, I set to something I don’t need access to when I’m actually shooting.Thank you David. I just read your free e-book. I am looking forward to join your journey and learn from your experiences along the way. Keep it up…My recipe for shooting in manual (warning: full of opinion, and certainly not the only way to do things):By the time Fuji had released the X-T1, they were already pretty far ahead in their handling game, and the X-T2 makes some solid refinements. There may be a few refinements yet to go. We’ll start with the Fuji’s biggest change in their camera’s interface, the “Focus Stick”Upon its release, the X-T2 was priced at around $1600 for the body alone or $1900 with the vertical battery grip. The X-T20, on the other hand, is listed at around $900 for the body, $1000 with the XC 16-50mm, or $1200 with the 18-55mm.
you had mentioned that the XT-1 was fine and you might not upgrade if you don’t print? Huh? I’m getting tack shot, gorgeous 16×20 prints from the XT-1 and that 56 1.2 you are showing. After 800 ISO it gets a bit rocky on big prints but 16×20 prints that are indistinguishable from my Canon 5DIII. What size are you printing ? PeaceIan, what I can tell you is that I love the 10-24mm (roughly 16-35) for travel. If I wanted less weight the 14mm (roughly 21) is great, but I love going really wide. The kit lens – 18-55 – is excellent and surprisingly I prefer it to the 16-55 (which is gorgeous, and much faster, but I like the flare on the cheaper lens – so if you’re open to used gear, I’m selling mine (used it for one trip)). Fuji has some fast lenses, constant /2.8, but I don’t use fast wide (heavy) lenses these days. But all their lenses are great. Lastly their 56/1.2 is a brilliant portrait lens. Fast. Beautiful. Those are my walk-around choices. Shop B&H's in stock, large inventory for fast shipping, great service and everyday low prices on Fuji XT2. For more info, please call 800-947-4415. Showing results for Fuji XT2 Thanks for the run down. For me it’s still a matter of being comfortable while holding and operating the camera. So for now I’m sticking to my canon dslr’s. But change might come sometime soon. Your pictures are certainly compelling arguments.
The Sandisk Extreme Pro is the best performing and most reliable UHS-I memory card out there. Nothing is a better buy. – Amazon / Adorama / B&HRear Buttons: These are mostly the same as the previous generation, except the Q-Menu button and Display/Back aren’t flush to the camera’s body anymore, making them easier to find without looking. I was really hoping that when I dug into the menus with the grip attached I’d find a setting under “Power Management” where I could set the camera to use the grip’s battery power first, but I didn’t. High-speed continuous shooting jumps from 8 to 11 frames per second with the mechanical shutter. For sports photographers who can have an assistant or editor to wade through their frames, this could certainly be a good thing. For me, when shooting wild life for instance, 8 frames per second ended up being too much and I wish I had knocked my frame rate down.
I have been receiving a lot of of requests for a review on my Fujifilm X-T2. As some of you may know, I've had progressively nicer Canon SLR cameras since I was switched over from film (augh! yes- I used to shoot film exclusively as a necessity and not a novelty). I went through three or four (can't.. Fujifilm has done an amazing job at pumping some of the best technology into this small camera and the sd memory card speeds are just an example of why this is one of the best APS-C cameras out there. It’s also a great option for the pro looking for backup and redundancy options when shooting high-profile jobs.As an extreme example, here’s the difference in size you can expect between a stock X-T2, and one with the grip, and an L-plate.
Many of the buttons on the front and back of the camera are programmable. To program the buttons, press and hold the DISP/BACK button on the back of the camera and a handy map of all the buttons will display on the LCD viewfinder. Here are a few changes I’ve made to how these buttons programmed, and, for reference, here is how Fuji programs them out of the box. I was looking to see if anyone used the x-t20 for streaming. I know that. We would need to have the xt20 register as a webcam (mainly done by most, using an If anyone is using the xt20 to stream and has any advice, tips, or knows where I can buy a continuous power supply...please let me know Fn2 (front of the camera, under the middle finger) — AF-C setting. For focusing, I switch between M and C with the front selector switch. When I switch to C (also on the front of the camera), I can optionally change the AF-C setting to one of Fuji’s five preset optimizations (standard, accelerating, appearing, obstacles, erratic). I leave the AF-C in “standard” by default. I assigned the front button because the mode switch is also on the front, so it’s easy to remember (“continuous mode adjustments are on the front”). Fuji puts “drive settings” under this button, which I rarely change.
Fn1 (on top of the camera) — wireless. I got used to this being here on the XT-1. I don’t use this often enough to justify a dedicated button, but the button is a bit awkwardly placed to press during composition, and I can’t really think of another setting that is crying out to be placed under the button. Fuji uses it to toggle face detection (which I don’t use).These simple controls, however, hide a very rich system of options — what you see on the viewfinder, autofocus settings, exposure settings, shutter sounds, image size, you name it — all of which are accessible via the camera’s menu system. I say “system” because, when you hit the menu button, there are seven top-level menus, some of which contain multiple pages, and one of which (the menu that looks like a little wrench) contains even more menus! Needless to say, using these menus during shooting is inconvenient at best, and I have heard some folks complain about the non-intuitiveness and illogical layout of the menus.Raw+JPEG: This setting will write RAW to slot 1 and JPEG to slot 2. I haven’t noticed this method slowing down performance of the UHS-II memory card. - Light weight Aluminum, machined by precision CNC and surface processed with hard anodized oxidation treatment. Description: Camera Thumb Grip Support Custom For Fujifilm Fuji XT1 XT2. Item Specifics: - Precision made light weight solid aluminum, high quality Fuji incorporated a second Focus Stick on the VPB-XT2, which is really nice. This is a no-compromise implementation. In the three copies I’ve handled, I haven’t noticed any difference between the body and grip Focus Sticks.
If you’re looking to save a little cash and don’t find yourself doing a lot of burst photography, then UHS-I cards will work great in this camera.Sorry for the off topic question … but, can you tell me about the strap attached to the camera? I have been looking for something with Fas-tex type quick release connectors but without the bulk of the neoprene straps that usually come with them.
It’s hard to believe that it’s already been a year and half since the earliest X-Pro2 units were getting in the hands of photographers. It truly was the first major overhaul to the guts Fuji’s interchangeable lens camera bodies. New sensor, new processor, it actually was “all-new.” . While I pointed out the weak links in past Fuji cameras, I always give credit where it is due and it is due to them with this Fuji XT2. I just wish I had it for two weeks so I could have truly dug in, traveled more with it and had a chance to test the 4K video and.. Well written, will try to get hands on XT2 to test it next to my Nikons this coming season. Thanks for sharing. jozefThis is a huge topic and a very important question. I spend a lot of time testing cards with various cameras on this subject. Especially cameras with high data rate like the Canon 1DX II and the Canon 5D IV. For the Fujifilm X-T2 I’ve yet to really run into problems with cards not working for 4k video. The Fujifilm X-T2 has a data rate of only 100Mbps. While this isn’t terrible data rate to have, it’s also doesn’t pack a whole ton of information and won’t require a very fast card.
Not much new to write about here either. The X-T2 will ship with the usual NP-W126 battery, BC-W126 charger, body cap, strap clip attachment tool, metal strap clips, shoulder strap, and covers for the hot shoe and sync terminal.Great post, reduced to the essence. And I won’t update myself. The only thing I’d really love to have on my XT-1 is that joystick. But not to the point that I’d spend that much money. After all, I’m still shooting the initial X-100 after all these years…100Mb/s (megabits per second) is only 12.5MB/s (Megabytes per second). Based on that alone, almost every card above should work. The only reason they wouldn’t is if you run into maybe some sections in the flash memory that chugs or runs slower. I’ve had some older cards perform very inconsistent with read and write speeds. So just stick with new U3 cards and you’ll never have those problems, as U3 guarantees a minimum of 30MB/s transfer rate.Outside of the Focus Stick positioning mentioned above, the controls on the camera are as well placed as one could expect from a camera this small. I am no professional, but the Fuji XT-2 is enough camera for someone in my skill level to advance in Combined with the 23MM F2 lens, the Fuji XT-2 becomes a very versatile camera that I can use for The X-T2 is perhaps one of the top cameras from Fuji. It's about the same weight as a small DSLR..
In my X-T1 Review, I started the Grip section with a problem as well, albeit, with tongue pressed firmly in cheek: The Fujifilm X-T2 is a DSLR-style weather-resistant mirrorless camera announced by Fujifilm on July 7, 2016. It uses the Fujifilm X-mount and is a successor to the Fujifilm X-T1. Sales of the camera began on September 8, 2016. On September 6, 2018, Fujifilm announced its successor, the X-T3. Here we have my usual button by button, dial by dial, and switch by switch notes on all the ways one might interface with their X-T2. This section will focus on operation quality, with handling notes thrown in for good measure where I can’t help myself.Joystick! Part of the gains in focus speed come from the joystick (below) that first appeared on the XPro-2 to the relief of everyone who has ever used a Fuji. Use it to navigate menus, or to move your focus point when shooting, it’s a huge ergonomic improvement.
That means you really still need to trust what your eyes are showing you, vs. Having blind faith in the green boxes, as they will lie to you. This could be a problem for photographers with eyesight that can’t be fully corrected via the diopter and would rather be able to push the shutter based on what the camera says than wear eye-glasses.AF-L — auto-focus lock. By default, Fuji assigns this to AF-L(ock), but I assign this button to AF-ON. What this gives you is a Fuji version of what others call “back button focus,” which many people (including myself) find convenient. With back button focus, you can set the front switch to M, which enables manual focus (and your chosen focusing aid like focus peaking will show up in your viewfinder). From there, you can release the shutter immediately with a full press; or press the setting the AF-L (now programmed to AF-ON) to auto-focus, even in Manual mode (!).One option that occurred to me that is currently impossible on two fronts is setting the Focus Stick Press to access the Q Menu (front 1), then changing the Q Menu section highlight with the Focus Stick, and adjusting the setting with the front Command Dial (front 2). There is definitely some room for customization refinement in this cameras.
-Make sure the gold-plated connectors on your memory cards are clean. Every so often when I put a card into the camera doing these tests it will run super slow. I’ll take it out, wipe it down, then everything is fine again. So check your pins on your card and give them a nice wipe down with your shirt or something.This ad and tracker-free website’s biggest source of support by far comes from you, its readers, at no cost. Just use the links below for any of your online shopping to help me keep testing, reviewing, and comparing.After finishing the test, I had to double-check my results, I’ve never seen a camera perform this well with SD cards and it surprised me it did so much better than the X-Pro2. This makes the Fujifilm X-T2 one of the fastest cameras at writing to memory cards on the market, completely destroying all of the competition. Aside from the Canon 1DX II with its insanely fast CFast memory cards of course.The new sensor delivers an ISO sensitivity bump, bringing native ISO up to 12,800. Grain is still present, but its more pleasing than other cameras I’ve used.Continuous AF, and the X-T2’s Custom Settings are tailor-made for “Red Badge” lenses like the XF 16-55mm F2.8 WR, XF 50-140mm F2.8 WR, and XF 100-400mm F4.5-5.6 WR.
Unlike the X-T20, on the rear of the X-T2 you can notice the handy AF Joystick to move the focus point.Two additional stops of exposure compensation are accessible by spinning the Exposure Compensation Dial to the C position, and spinning the front dial to control how much, or little exposure is compensated. What would be awesome is if the dial was intelligent enough to pick up where you left off in spinning the dial. So if you get to -3EV and want to go darker, switching to C would pickup from -3. Instead, you start back at zero, and spin the wheel a few times.My general philosophy towards menu customization is that the settings that you change frequently, or the operations that you invoke most often, should be at the top-level of an easily accessible menu. If an item is buried, even one or two levels deep, it is a pain to access that item frequently.
Mechanical dials are provided for key operation, including the shutter speed, ISO sensitivity, exposure compensation, drive modes and metering modes. The settings can be adjusted even when the camera is turned off, so that you can be always ready for the next shot. For the prevention of operation errors, the dials for shutter speed and ISO sensitivity are equipped with a Lock & Release button, and are designed with extra height for operability improvement from FUJIFILM X-T1.When i first looked at that picture i thought, : “Needs noise for more atmosphere” … maybe it shows that i am old and used to noisy analog pictures from high iso films ;o)
In our cameras we are constantly swapping cards taking them in and out. Micro SD cards are mostly designed for cell phones and other small devices where for the most part they remain in the device permanently. I haven’t lost a card yet, but I could see it being a disaster waiting to happen. Buy products related to fuji xt2 products and see what customers say about fuji xt2 products on Amazon.com ✓ FREE DELIVERY possible on eligible purchases. Great camera, comming from canon 7d, this is alot better and light weight I plan on incorporating more Micro SD cards into these tests into the future as I get a lot of people asking me about them. Used Fuji Cameras & Lenses. While Fujifilm made a name for itself with film and film cameras, they have since become a leading brand for digital cameras At KEH, we offer many used Fuji products, from lenses to cameras. Shop popular models like the used X100F, XT2, XT1, XT10, XT20, and more
Sandisk memory cards really are the best for Fujifilm cameras now that the Lexar we all knew and loved is gone. While Lexar, Delkin and Sony did outperform Sandisk by a few MB/s in this particular test, the speed difference is negligible and the Sandisk Extreme 300 cards are really worth it, especially considering they have a lifetime warranty.The best of both worlds here; two slots unlike the X-T1, and both are UHS-II ready, unlike the X-Pro2.Those are the things that excite me. Basically it’s a new XT-1 with more megapixels and a bunch of overdue improvements. There’s other stuff too – like the little buttons that will lock down your ISO or Shutter dial (above). I don’t see myself ever using them, but you never know. There’s improved video functionality that some might find exciting but I don’t know enough about the intricacies of video to know whether this is worth getting excited about.The X-T2 is a little bit than the X-T1 on every axis, but it’s still a very compact camera, and close enough that I still find myself double checking the badge on the front to verify which camera I’m holding.D-Pad (Selector): More refinement here. Still the same size with ridged selector buttons, the D-Pad on the X-T2 isn’t nearly as clicky as the second version of the X-T1’s was, but it is less recessed as well, making it easier to use. I’d love the best of both worlds here, clicky and accessible.
More dome-shaped, the standard Eyecup on the X-T2 makes it easier to compose in bright sunshine. It’s a bit shallower than the EC-XT L Long Eyecup,→ and I haven’t had any trouble using it with my glasses on.In my testing so far, I’m having a lot of success with the new AF-C Custom Settings. With my camera set to Wide/Tracking, and my Custom Settings at 0/2/Front, I can keep a high contrast section of a subject in focus until it is about to leave the frame of my viewfinder, or track the eye of my black cat as she is walking towards me, or a pool ball after it’s been struck.In the Boost mode, multiple batteries can operate at the same time to give a boost to camera performance in continuous shooting, shooting interval, shutter release time lag and blackout time, while also extending the duration of 4K video recording to approx. 30 minutes. XT3 cameras. This isn't to say one is better than the other, but it brings a better perspective, as they show the camera in different environments. However, I think the XT3 really shines here. I must add though, that the message of the actual piece is just as important as the footage
So you have the best of both worlds: lift the camera to your eye, and if you see the red focus peaking on your subject, you’re in focus. If not, you can either manual focus via the lens ring or hit the AF-ON button to autofocus. I love seeing the manual focus aids even in autofocus mode; it makes it really quick and easy to see if I’m locked on. Give it a try and let me know what you think, and, by the way, if you prefer the way the camera works out of the box, the behavior under the C and S switch will work as before. Fuji XT-2 Crash Course Download. Fotografiinstruktioner Fotograferingstips Fusklappar Fotografering Fototips. Caught a new Fujifilm XT-2. Been contemplating g Been contemplating getting the new metal lens hood for the 23 mm f/1.4. Rationally it is not the most economically sound decision but the.. Fujifilm X-T2. From Wikipedia, the free encyclopedia. Jump to navigation Jump to search. Metering modes. Multi, Spot, Average, Center Weighted
.The front dial is strangely overlooked when it comes to camera controls in general. As I’ve griped about before, the front dial still can’t be used for Q Menu selection as it could on the X-T1, as far back Firmware Ver.1.31. Selecting items with the front dial is quicker as you aren’t moving your thumb to and from the rear dial. I’m still hoping Fuji will correct this in an upcoming update.To truly maximize the potential of your X-T2 you should stick with the Lexar 2000x or Toshiba UHS-II memory cards. Nothing else compares to the speed you get from these two cards. However, if you just need a card to run in your second slot as a backup or overflow, then a fast UHS-I card may suit your needs just fine.
The Fuji XT2 was just announced, and I've gotta say that this is going to be the camera to have. The Fuji XT2 takes everything from the Fuji XT1 that I loved enough to switch from Nikon and makes it better. It retains separate dials for ISO, aperture, and shutter speed (awesome!), still has a tilting LCD.. If you want to lock focus on one particular part of a subject, like say, they eyes, and have some flexibility in reframing and the freedom of your subject to move, use the same settings above with your AF Mode set to Wide/Tracking.
As compared to its predecessor, the X-T2’s EVF is rated as being twice as bright. This is immediately evident when pointing the camera at something bright and noting how much brighter the UI elements are.The X-T2 is another camera from Fuji that has a great shutter sound. It sounds a lot like the X-Pro2’s that I loved so much, only a little bit lower in tone. Good to see current aps-c sensor is equal if not better than last generation full frame sensor in term of high isoThe Fuji Views blog contains thoughts and opinions on Fujifilm, the compact mirrorless camera market, and photography in general.Unlike the X-T2 which crops the sensor by 1.17x, the X-T20 doesn’t crop while recording 4K. This means that the new camera doesn’t perform full pixel readout but rather applies line skipping. As such the X-T20 has less sharpness and more aliasing in comparison to the flagship camera.
At the weight of another camera, and pretty significant cost when not on sale, the decision to buy this accessory shouldn’t be taken lightly. I have purchased one myself, but because I have the luxury of owning other cameras, I intended to leave it permanently attached to my camera, and I would if it weren’t for what I feel is a pretty big bummer of a flaw.The high-speed processing power and the use of improved algorithms have significantly improved the basic autofocus performance, improving the focusing performance on points of light, low-contrast objects and subjects with fine and delicate textures such as bird feathers and animal fur, which have previously been the weakness of phase detection AF. The FUJIFILM X-T2 also features AF-C Custom Settings for even higher accuracy in focus-tracking moving subjects. You can customize settings to optimize AF characteristics according to the type of subject movements.
Excellent High ISO Performance. I’m also not the guy who shoots on the streets at midnight and I can’t imagine scenarios where I’d want the 12800 ISO (expandable to 51200) but what I get at 3200 is excellent (and remember I’ve just got a pre-production model, so it’s likely results from production models will be even better). Fujifilm XP120 Fujifilm X-T2 Fujifilm XF 50-140mm F2.8 Fujifilm 16-55mm F2.8R LM WR Fujifilm XF 23mm F2 R WR +3 more. Weighed it yesterday and its 2.2kg.Add a Think Tank Retrospective bag with only a few bits and bobs in it and it comes to 4.6kg.Gonna take the XT2 out for a 2 day.. My advice is not to spend a lot of time customizing the menu system and making your own custom menus. The camera allows this, but with all the XT-2’s dedicated dials and buttons, plus the Q menu, it’s just not worth it to spend a lot of time making access to absolutely everything optimal. Go shoot some photos instead!
With a 1GB buffer and memory card speeds like this, we are looking at some really good performance, actually some of the best on the market.Sensor: APS-C 24.3 MP / Processor: X-Processor Pro SD Memory Card Type: UHS-II / UHS-II Continuous Burst: 8fps – (11-14fps with battery grip) Size of Buffer: 1GB Uncompressed Shots Till Buffer Fills: 31 With Lexar 2000x Est. Time Taken To Clear Buffer: 6-7 seconds with the Lexar 2000x. Keep in mind, when you have this set, you are slowing down your whole system to whatever the slowest card you have is. In other words, the camera can only perform as fast as what’s in slot 2.
Shutter release— “focus” and “release” priority modes are available. I set it to “release” priority by default, through a one-time change via the AF/MF menu (called “RELEASE FOCUS PRIORITY”). In auto-focus modes (S or C), this means that the shutter will release even if a focus lock has not been achieved. I never like my camera telling me NOT to make a photo!The first that catches your eye is the size and weight: the flagship X-T2 is both bigger (132.5mm x 91.8mm x 49.2mm vs. 118.4mm x 82.8mm x 41.4mm) and heavier (507g vs. 383g) than its mid-range sibling.Moreover, while the X-T20 doesn’t have weather-sealing of any sort, the X-T2 is dust, splash and freeze proof down to -10°C. When matched with weather-sealed XF lenses, the camera can stand up to the harshest of conditions.Focus Stick (Focus Lever): Fuji still can’t seem to decide what to call this thing. Ah well. Mine feels a little different than the one on my X-Pro2. Not better or worse, just a little different. On pre-production sample, the Focus Stick clicked nicer going one direction than it did the other, but it probably had more stress-testing done on it than would be typical, and all the of production samples I’ve handled have been consistent.This ad and tracker-free site is made possible by the support its readers. If you enjoy the content, you can help by using any of the links below. Thanks!
At the expense of battery life, you’ll be treated to significantly faster refresh rate with Boost Mode turned on. In low light the frame rate does appear much higher in my testing—much less blur and smearing to the image—but the frames do drop when the light gets low enough and your aperture is small enough once focus has been acquired.What I would really like to see is the the grip intelligently added to a second page the SET UP > BUTTON/DIUAL SETTING > Fn/AE-L/AF-L BUTTON SETTING Menu when connected. It’s a bit of a user experience blunder the way it is now.
A professional freelance trailer editor. I’ve been blogging for a decade and this site focuses on benchmarking memory cards, camera accessories and lens reviews.Speaking of the AF-L button, its position can make adjusting the position of your camera on a ballhead frustrating when manually focused. It’s all too easy to hit the AF-L button with your thumb, focusing the camera on something else.All X-Trans III/X-Processor Pro have the same autofocus engine Autofocus performance will depend on your lens selection a lot. Detailed organization of the Q menu is probably not that important to most shooters; it is easy to navigate with the D-pad. I try to make sure the things I do relatively frequently (e.g., set the self timer or change the film simulation mode) are in positions 1 and 2 in the top row, but otherwise I don’t worry about it too much.
I’m not seeing huge gains in autofocus pace with slower lenses like the XF 56mm F1.2, and the old XF 60mm F2.4 Macro, and that’s to be expected. Those lenses aren’t intended to, nor are they built to perform autofocus miracles. Make your lens selections accordingly.. Does it get in the way, or get out of your way? That’s always the question.
The X-T2, like all recent Fuji cameras, features a silent electronic shutter for when things need to be quiet, or, in the case of the X-T2, frame rates need to go from the crazy 11 fps limit of the mechanical shutter, insane at 14 fps.While not exclusive to the grip, the EVF refresh rate is very noticeable in lower light situations, and will eat through batteries quickly, and this is a feature it could be easy for lowlight shooters to get used to.I suppose I could just leave the body’s battery chamber empty to save a little weight, but I sure would like to have 1,000 shots at my disposal. Sadly, grip removal is going to be part of my photographic routine when I want to shoot with the X-T2.It seems like an awesome camera and it’s cool to hear Fuji is still listening to its users… if you speak with them again remind them they hadn’t upgrade X100T’s firmware in ages 😉
X-T20 has a 2.5mm microphone input, which will require an adapter for most microphones. The X-T2, on the other hand, has a 3.5mm microphone input. Neither has a headphone jack built into the body but here again, the X-T2’s battery grip comes to the rescue: it features with a headphone jack to enable audio monitoring during video recording.Lens cap — lens caps are a pain in the neck to deal with when you’re shooting, so I leave mine in my bag or at home. Of course, I use them when I am transporting my lenses, so don’t throw them away.For those interested in the X-Pro2. https://www.creative-live.com/courses/fuji-x-pro2-fast-start-john-greengo This is a free video program that covers the nuts and bolts of the X-Pro2. It plays tomorrow. July 7.The two cameras, despite being priced very differently, have a surprising number of features in common – perhaps even more so than the original X-T1 and X-T10. These include the new 24MP APS-C X-Trans III sensor, advanced hybrid autofocus system with Custom AF settings, 4K video at 30fps, just to name a few.Yes you can. There are even UHS-II micro SD memory cards, however, only the newest Micro SD memory cards seem to perform as well as SD cards. I’ve been benchmarking Micro SD memory cards on my GoPro Hero5 memory card page.
Out of the box, I find the XT-2 very simple to use, and if you just use the camera as-is, I find that it handles “pretty well” for general purpose photography. One of the things that drew me to the camera in the first place are the dedicated dials and hardware controls on the camera itself. I love that I can pull the camera out of the bag and see at a glance how each element of the “exposure triangle” is set, and for those coming from the tradition of older film cameras (my first “real” camera was a Nikon FE), modifying these settings is intuitive to the point of being self-explanatory (the aperture ring controls the aperture, the shutter speed dial controls the shutter speed, and so forth). 420 fuji xt2 products are offered for sale by suppliers on Alibaba.com, of which other camera accessories accounts for 1%, digital battery There are 20 suppliers who sells fuji xt2 on Alibaba.com, mainly located in Asia. The top countries of supplier is China, from which the percentage of fuji xt2..
I was wondering if you used Lightroom and whether you could help by sharing any tips on processing to get best results? The vertical grip will also alter the handling in landscape orientation, similar to, but not as much as, the MHG-XT2 Metal Hand Grip.→ The added grip serves double duty by adding some rigidity to the the grip.I can’t help but wonder whether the Exposure Compensation dial should join “Dial Lock Release” party, and share their superior rotation.Exposure lies at the heart of photography (it’s the primary mechanism we use for controlling light and tone, and it plays a large role in composition, as well). One of the things that sets the XT-2 apart from something like an iPhone (which is a great camera for street photography!) is the full creative control one has over exposure during shooting.
At the MSRP of $329, it’s a tougher sell for a lot of people, but easier than the VG-XT1 when it was first released which added far less functionality to the camera. Fortunately, the grip is already getting listed on sale for $284.85→ and discounted as part of the kit for just $100 more than the body-only→ at the time of writing. In short, don’t pay MSRP for this accessory, and with that in mind, I think it’s actually a pretty good buy so long as you don’t mind the significant increase in size and weight. The second aspect is the new Film Simulation mode called ACROS. These profiles have always been one of my favourite aspects of Fuji X cameras and I'm glad to see that the company is continuing to invest resources to produce more of these Exposure Compensation Dial: Same size an finish as the X-T1, but a good deal taller. I’m not a fan of how this one turns. The dial is so tight, it’s tough to turn it just a single click. I understand why—I find the exposure compensation dial on my X-T1 turned to places I hadn’t left it on occasion—but I prefer the feel of how the other dials turn much more, something I’ll have more to say about.
Hello David, If I missed an earlier Q/A for the subject, please be so kind to redirect or give another short answer. In regards to your comment in the beginning of the post…” Having spent a month with a pre-production model and wishing most of my photography during that month was not underwater, ” I am curious about the underwater part. Underwater as in too busy… Or, Shooting underwater? If yes, with the XT1 and a housing? I was thinking about getting a housing if I keep my XT1. Side note: Bad timing on my part, I just purchased an XT-1 the first of July and went to Costa Rica for a month. Sold my Canon stuff to go smaller and lighter, mostly for back country outings. I was thinking of either selling the XT1 with a loss to the wallet and get the XT2, or just keeping it, be happy with it and go hiking, climbing, and back country skiing with it. I liked your comment about not upgrading and use the money to travel… non stop from Seattle to anywhere cool. Thanks.Fn3 (top button of the donut on back) — autofocus setting, changes between single point, zone or wide/tracking. Only relevant in AF-C mode, otherwise I leave this on single point. One nice feature of the camera is that it will remember your last choice on a per mode basis (so, for example, I use “wide/tracking” for AF-C and “single point” for AF-S, and the camera remembers that).This grips adds a lot more to the size than grips before it. With the incremental increase in size of the body, and the significant increase in size of the grip, the gripped X-T2 package is quite a bit larger than a gripped X-T1. Something for potential upgraders to keep in mind.
4K has been added to video. As regular readers know, I’m not big on the video, however I did capture some video for real estate with some narration using the Vertical Power Booster Grip with my trusty Sennheiser PX 200-II i headphones.→ They, and their mic worked perfectly with the X-T2, but man, those 4K files are not small. The limitation of the Q menu is that menu items that involve more than a single-level of hierarchy cannot appear on this menu. For example, there is a setting I access (somewhat infrequently) that controls the behavior of the camera’s auto ISO functionality. There are three modes of auto ISO behavior, and you can switch between them or set the characteristics of each mode. This menu item is too complex for the single item-value pair scheme of the Q menu, so you either need to access it via the regular menus under the MENU button.This ad-free site is made possible by the support its readers. If you enjoy the content, you can help by using any of the links below. Thanks!Fn6 (bottom donut button) — flash menu. When the flash switch is up, this sets the flash mode (TTL, M(anual) or Off), plus compensation, TTL mode, and various other settings. Very handy for flash exposure compensation during shooting, and I shoot quite a bit with flash during the day. Fuji uses this button to toggle between “normal” and “boost” performance modes. This seems to me like something you don’t need to do on the fly, but perhaps if you photograph a lot of sports and want to tweak the burst rate and AF-C tracking on a per moment basis, this wouldn’t be a bad choice. (Side note: the battery grip has a dedicated “boost” switch).